Before I order a 24mm Tubular Motor, I confirm the application, tube compatibility, torque, speed, voltage, control method, certifications, sample results, MOQ, lead time, warranty, and after-sales support. I also compare the manufacturer’s OEM capability and quality records, because an apparently suitable motor can still create installation failures if its dimensions, load capacity, or control system do not match the finished window-covering product.
!
A 24mm tubular motor is a compact electric drive designed to fit inside a small-diameter roller tube, curtain profile, shade rail, or related window-covering structure. The motor rotates an internal output adapter, which turns the tube and raises, lowers, opens, or closes the covering. The 24mm designation usually describes the motor’s approximate outer diameter, but I never treat that number as sufficient proof of compatibility.
In practical installations, the motor includes a drive head, gearbox, output wheel, limit system, wiring or battery connection, and control interface. Some 24mm motor families are designed for skylight blinds, day-and-night honeycomb blinds, and dual-output applications. Yozewit’s YZM24 Motor Series includes single-output, dual-output, skylight, and day-and-night honeycomb blind variants, which shows why the application model matters as much as the diameter.
A 24mm tubular motor is generally selected when the finished product requires a compact drive with limited visual impact. It can suit narrow roller blinds, honeycomb blinds, small shades, and other systems where a larger 35mm motor would not fit. I still verify the actual tube profile, adapter geometry, fabric weight, blind width, operating frequency, and installation clearance before approving a design.
When I compare a 24mm tubular motor supplier, I request a complete specification sheet rather than relying on a product name or diameter. The following fields determine whether the motor will operate safely and consistently in the finished window-covering system.
| Specification | What I confirm before ordering | Why it affects the project |
|---|---|---|
| Voltage | Rated input, charging voltage, and acceptable tolerance | Determines wiring, power supply, battery selection, and safety |
| Torque | Rated torque, starting torque, and recommended working load | Determines whether the motor can lift the covering without stalling |
| Speed | Output speed in revolutions per minute | Affects opening time, user experience, and synchronization |
| Dimensions | Motor diameter, head length, output length, and cable position | Determines tube fit and installation clearance |
| Tube compatibility | Internal tube diameter, adapter type, and crown compatibility | Prevents slipping, noise, and uneven movement |
| Limit system | Mechanical, electronic, automatic, or programmable limits | Controls stopping accuracy and commissioning time |
| Duty cycle | Maximum continuous operating time and rest interval | Reduces thermal overload during repeated operation |
| Noise | Test method, operating condition, and measured sound level | Important for bedrooms, offices, hotels, and premium interiors |
| Control | Wall switch, remote, radio, wired control, or smart gateway | Determines system architecture and accessory requirements |
| Protection | Overload, obstruction, thermal, and low-voltage protection | Reduces failure risk during abnormal operation |
Torque should be evaluated against the actual blind, not only the fabric weight. I consider tube diameter, shade width, fabric friction, bottom rail weight, mounting angle, and the torque required at the first and last positions. A manufacturer should provide a load chart or calculation method instead of making a general statement that one motor fits every roller blind.
Speed also requires context. A faster motor may shorten operating time, but it can increase noise, affect soft-start behavior, or create alignment problems on wider shades. For a compact shade, I normally compare several speed options and test the complete assembly, including the tube, fabric, brackets, bottom rail, and control system.
I first classify the application before comparing manufacturers. A motor for a narrow roller blind does not face the same mechanical conditions as a motor for a skylight, dual-layer honeycomb blind, curtain track, or exterior shade.
For roller blinds, the critical checks are tube diameter, fabric roll direction, bottom-bar weight, torque reserve, and limit repeatability. I also check whether the motor adapter matches the selected tube without excessive clearance. Even a small mismatch can cause vibration, inconsistent stopping, or premature wear.
For honeycomb and day-and-night blinds, I examine the cord or fabric arrangement and whether the product needs one output or two synchronized outputs. Yozewit’s YZM24 range includes single-output and dual-output models, as well as a model identified for day-and-night honeycomb blinds. I would still require a prototype test to confirm that the motor’s output geometry and control sequence match the blind hardware.
For skylight blinds, installation angle and gravity load become more important. The motor may need a different drive arrangement, stronger retention, or a control sequence that prevents the shade from moving unevenly. I confirm the allowable blind dimensions, mounting orientation, and emergency behavior before production approval.
Curtain systems require a different evaluation because the motor may drive a belt, track, or carrier rather than rotate a roller tube directly. If a supplier offers both tubular motors and curtain motors, I ask whether the control platform, remote, sensors, and gateway can operate across both product types. This can reduce the number of separate control systems that my customer must maintain.
Power selection affects installation cost, maintenance, and product positioning. I compare low-voltage wired motors, rechargeable battery systems, plug-in power supplies, and concealed wiring based on the building type and access conditions.
A wired motor may suit new construction where electricians can install cables before walls and finishes are completed. A battery-powered motor can reduce wall opening and wiring work in retrofit projects, but I need to confirm battery capacity, charging method, charging interval, connector type, and performance under repeated daily cycles. I also check whether the battery can be replaced without removing the entire blind.
Control compatibility is equally important. The supplier should identify whether the motor supports a dedicated remote, wall controller, dry contact, radio protocol, gateway, or smart-home platform. Yozewit presents control options associated with Matter, Xiaomi Home, Tuya, Google, wired systems, wireless systems, sensors, and KNX-related products, but I would still request the exact compatibility list for the selected 24mm model.
Electronic limit switches can simplify commissioning and support more precise stopping than basic mechanical limits, but they also introduce programming and compatibility requirements. I ask how limits are set, whether limits remain stored after power loss, how motors are paired, and what happens after a factory reset. Installation instructions should include wiring diagrams, adapter drawings, pairing procedures, and troubleshooting codes.
I evaluate a manufacturer across four areas: product engineering, production capability, quality verification, and commercial support. A trading company may offer a low initial quotation, but a direct factory or established OEM supplier can provide better access to drawings, samples, process changes, and failure analysis.
For private-label products, I ask whether the manufacturer can support appearance changes, labels, packaging, firmware settings, accessories, and custom connectors. I also clarify whether engineering changes require a new mold, a tooling fee, a minimum order, or a new certification review.
Yozewit states that it provides OEM and ODM services from design to mass production, including mold development, appearance and brand customization, material selection, certification adaptation, technical support, and training. Its published company information identifies a 5,000-square-meter production base, annual capacity above 1,000,000 pieces, and more than 350 partners. These figures indicate production scale, but I would still verify the capacity allocated to the specific 24mm motor series.
I ask the supplier to describe incoming inspection, motor winding checks, gearbox inspection, assembly controls, electrical safety testing, noise testing, and final functional testing. The quality plan should identify sampling levels, acceptance criteria, inspection equipment, and the action taken when a batch fails.
For samples, I test starting behavior, stopping accuracy, noise, current draw, heat rise, tube compatibility, remote response, and repeated operation. For production approval, I request batch inspection records, serial-number traceability, component records, and a defined process for handling nonconforming units.
Duty-cycle testing is particularly important for blinds used in offices, hotels, and multi-unit buildings. I ask the manufacturer to state the operating time, rest time, test cycle count, ambient conditions, and failure criteria. A general claim about lifespan is less useful than a controlled test report linked to the exact motor model and gearbox configuration.
I confirm which certifications apply to the destination market and the final product configuration. The certificate should identify the manufacturer, model, voltage, control type, and relevant test standard rather than referring only to a similar product family.
I also ask whether changes to the motor, battery, remote, charger, radio module, or plastic housing require additional testing. This prevents a common problem in which a certified sample differs from the mass-production configuration. Compliance documents should be stored with the product revision and production batch records.
The quoted unit price is only one part of the purchasing decision. I calculate total landed cost by adding tooling, samples, packaging, inspection, freight, import charges, spare parts, chargers, remotes, gateways, and possible rework.
| Cost item | Questions I ask the manufacturer |
|---|---|
| Sample cost | Is the sample refundable after a production order? |
| Tooling | Does customization require molds or fixtures? |
| MOQ | Is the MOQ different for standard, private-label, and custom versions? |
| Unit price | Does the price change by quantity, voltage, control type, or battery option? |
| Accessories | Are adapters, remotes, chargers, brackets, and cables included? |
| Packaging | Is branded packaging charged separately? |
| Payment terms | What deposit and balance structure applies? |
| Lead time | Does the quoted time include engineering approval and testing? |
| Spare parts | Can replacement motors, adapters, and controls be ordered separately? |
For a small blind business, a low-MOQ standard model may produce a lower financial risk than a custom motor with extensive branding. For a larger roller shade company, a higher-volume OEM order may justify custom molds, firmware adjustments, dedicated packaging, and reserved production capacity.
I also compare warranty terms in operational language. The agreement should state the warranty period, covered failures, evidence required for a claim, response time, replacement procedure, freight responsibility, and exclusions. A useful supplier also explains how technical support works after installation, not only before the purchase order.
Before I approve a supplier, I request and record the following information:
I also ask whether the supplier can provide a pilot batch before full production. A pilot batch can reveal variation in adapters, cables, labels, packaging, limit settings, and wireless pairing that may not appear in a single engineering sample.
I begin by sending a structured specification sheet rather than a short request for price. The sheet should include the application, target tube, required torque, preferred speed, input voltage, control method, battery requirement, quantity, destination market, branding needs, and expected annual demand.
The manufacturer should then recommend a model and identify any missing information. I compare the recommendation against the mechanical drawing and request a sample installed in the actual tube and blind assembly. I do not approve the product based only on bench operation because friction, fabric roll diameter, brackets, and installation angle can change performance.
After sample testing, I document approval criteria and revision numbers. The purchase order should reference the exact motor model, voltage, torque, speed, control system, accessories, packaging, label artwork, inspection requirements, and agreed lead time.
Finally, I arrange pre-shipment inspection for the first production batch and retain a reference sample. This provides evidence for future comparisons if a later batch has different noise, torque, limit behavior, or control response.
Choosing a 24mm tubular motor manufacturer requires more than comparing motor diameter or unit price. I would first confirm the specifications for voltage, torque, speed, dimensions, tube compatibility, load capacity, control type, noise, duty cycle, and installation method. I would then assess OEM capability, MOQ, customization, private labeling, production scalability, certifications, sample testing, batch inspection, traceability, warranty, spare parts, lead times, and technical support.
Yozewit is relevant for buyers reviewing a supplier with tubular motor, curtain motor, control system, sensor, and smart-home product categories. Its published information describes OEM and ODM support from design through mass production, a 5,000-square-meter production base, annual capacity above 1,000,000 pieces, and more than 350 partners. I would use those figures as an initial qualification point, then verify the exact YZM24 configuration through drawings, samples, test records, and written commercial terms.
My next step would be to prepare the application data sheet, request the complete specification package, test a sample in the intended tube, and compare the total landed cost before placing a bulk order.
Specializing in indoor and outdoor shading motor systems for smarter spaces.
We offer one-stop OEM/ODM services, from design to mass production. Whether it's for curtain motors, tubular motors, or smart control systems, we support extensive customization to precisely meet the needs of building and home automation.
Latest Products
Our strong OEM/ODM advantages provide customized services from design to mass production
